InfraRecorder version 0.53.0.0 (x86)
Started: zondag, augustus 10 2014 11:50:40.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.
CCore::BurnImage
  [0,0,0] TSSTcorp DVD+-RW TS-L632H D400
  File = C:\Users\Everaard\Documents\zorin-os-6.2-lite(1).iso.
  Eject = 1, Simulate = 1, BUP = 1, Pad tracks = 1, Close = 1, Overburn = 1, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
  Command line to run: "C:\Program Files\InfraRecorder\cdrtools\cdrecord.exe" -v dev=0,0,0 gracetime=5 -eject -dummy -sao driveropts=burnfree -pad -overburn "/cygdrive/C/Users/Everaard/Documents/zorin-os-6.2-lite(1).iso"
   > scsidev: '0,0,0'
   > scsibus: 0 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'TSSTcorp'
   > Identifikation : 'DVD+-RW TS-L632H'
   > Revision       : 'D400'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: CD-RW
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD+R/DL 
   > Profile: DVD+R 
   > Profile: DVD+RW 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RAM 
   > Profile: DVD-R sequential recording 
   > Profile: DVD-ROM 
   > Profile: CD-RW (current)
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Profile: Removable Disk 
   > Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
   > Driver flags   : MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
   > Drive buf size : 1962752 = 1916 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data   649 MB         padsize:   30 KB
   > Total size:      746 MB (73:55.81) = 332686 sectors
   > Lout start:      746 MB (73:57/61) = 332686 sectors
   > Current Secsize: 2048
   > ATIP info from disk:
   >   Indicated writing power: 3
   >   Reference speed: 6
   > Disk Is not unrestricted
   > Disk Is erasable
   >   Disk sub type: High speed Rewritable (CAV) media (1)
   >   ATIP start of lead in:  -11745 (97:25/30)
   >   ATIP start of lead out: 359848 (79:59/73)
   >   1T speed low:  4 1T speed high: 10
   >   2T speed low:  4 2T speed high:  0 (reserved val  6)
   >   power mult factor: 1 5
   >   recommended erase/write power: 5
   >   A1 values: 24 1A D8
   >   A2 values: 26 B2 4A
   > Disk type:    Phase change
   > Manuf. index: 40
   > Manufacturer: INFODISC Technology Co., Ltd.
   >     Capacity  Blklen/Sparesz.  Format-type  Type
   >       295264             2048         0x00  Unformated or Blank Media
   >       295264             2048         0x00  Reserved (0)
   >       295264               32         0x10  Reserved (0)
   > Blocks total: 359848 Blocks current: 359848 Blocks remaining: 27162
   > Starting to write CD/DVD/BD at speed 10 in dummy SAO mode for single session.
   > Last chance to quit, starting dummy write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > BURN-Free is OFF.
   > Turning BURN-Free on
   > Sending CUE sheet...
   > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
   > Writing pregap for track 1 at -150
   > Starting new track at sector: 0
CCore::ProcessEnded
  Process exited with code: 254.
CCore2::EraseDisc
  Method = 2, Force = 0, Eject = 1, Simulate = 0.
CCore2Blank::Blank
  The drive is not in active state.
   -> Started the disc to make it ready for access.
  Handled events: 0x02
CCore::BurnImage
  [0,0,0] TSSTcorp DVD+-RW TS-L632H D400
  File = C:\Users\Everaard\Documents\zorin-os-6.2-lite(1).iso.
  Eject = 1, Simulate = 1, BUP = 1, Pad tracks = 1, Close = 1, Overburn = 1, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
  Command line to run: "C:\Program Files\InfraRecorder\cdrtools\cdrecord.exe" -v dev=0,0,0 gracetime=5 -eject -dummy -sao driveropts=burnfree -pad -overburn speed=4 "/cygdrive/C/Users/Everaard/Documents/zorin-os-6.2-lite(1).iso"
   > scsidev: '0,0,0'
   > scsibus: 0 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Warning: The DMA speed test has been skipped
   > Cdrecord-ProDVD-ProBD-Clone 2
   > 01
   > 01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0
   > 9'
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'TSSTcorp'
   > Identifikation : 'DVD+-RW TS-L632H'
   > Revision       : 'D400'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM
   > Current: CD-RW
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD+R/DL 
   > Profile: DVD+R 
   > Profile: DVD+RW 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RAM 
   > Profile: DVD-R sequential recording 
   > Profile: DVD-ROM 
   > Profile: CD-RW (current)
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Profile: Removable Disk 
   > Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr)
   > Driver flags   : MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
   > Drive buf size : 1962752 = 1916 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data   649 MB         padsize:   30 KB
   > Total size:      746 MB (73:55
   > 81) = 332686 sectors
   > Lout start:      746 MB (73:57/61) = 332686 sectors
   > Current Secsize: 2048
   > ATIP info from disk:
   >   Indicated writing power: 3
   >   Reference speed: 6
   > Disk Is not unrestricted
   > Disk Is erasable
   >   Disk sub type: High speed Rewritable (CAV) media (1)
   >   ATIP start of lead in:  -11745 (97:25/30)
   >   ATIP start of lead out: 359848 (79:59/73)
   >   1T speed low:  4 1T speed high: 10
   >   2T speed low:  4 2T speed high:  0 (reserved val  6)
   >   power mult factor: 1 5
   >   recommended erase/write power: 5
   >   A1 values: 24 1A D8
   >   A2 values: 26 B2 4A
   > Disk type:    Phase change
   > Manuf
   >  inde
   > : 40
   > Manufacturer: INFODISC Technology Co
   > , Ltd
   >     Capacity  Blklen/Sparesz
   >   Format-type  Type
   >       295264             2048         0
   > 00  Unformated or Blank Media
   >       295264             2048         0
   > 00  Reserved (0)
   >       295264               32         0
   > 10  Reserved (0)
   > Blocks total: 359848 Blocks current: 359848 Blocks remaining: 27162
   > Starting to write CD/DVD/BD at speed 4 in dummy SAO mode for single session
   > Last chance to quit, starting dummy write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > BURN-Free is ON.
   > Sending CUE sheet...
   > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
   > Writing pregap for track 1 at -150
   > Starting new track at sector: 0
CCore::ProcessEnded
  Process exited with code: 254.